PiON Test – Buffer test

Immediate test to check the surface cleaning conditions

PiON Test is a simple and rapid way to accurately monitor the surface cleaning thus managing within the shorted time period, any safety procedure and disinfection control. The PiON Test in fact can detect possible residual proteins on the surface after the disinfection. The reactive present in the superior part of the buffer, reacting with any protein possibly present on the surface triggers a colorimetric reaction of the solution present, thus providing for the surface cleaning level

PiON Test display the disinfection result in 10 min.

Time Sensitivity
1 minute 80 µg
5 minutes 50 µg
10 minutes 20 µg

PiON Test sensitivity table

The colorimetric change is clear, it is consistently sensitive and it does not need any addition device

The test reaction depends on the temperature and protein concentration present and according to the colouring it is possible to define the contamination level. The results are to be read within 10 minute from the test activation. After the maximum test exposure time, the test is void and it should be repeated. With PiON Test it is furthermore possible to interpret the contamination level according to the colorimetric change speed and intensity, being sensitive to temperature, therefore it is advisable to use at a temperature varying between 2 and 25°C.

The colorimetric result table correlating the incubation time with the protein µg present on the treated surface.

    I would like to receive documents relating PiON Test


    In accordance with the guidelines provided by the Ministry of Health regarding health advertising relating to medical devices, we inform you that access to this area of the site is intended for professional healthcare professionals.